Liberti Lab

Partemis 01

Large-format printing at furniture scale

Large Format FDM · In service since 2026

Partemis 01 — large-format 3D printer with an 800 mm build volume
Partemis 01 on the studio floor, Jersey City

Most 3D printing is small. Parts come off a desktop machine at palm size, and anything larger gets cut into pieces and glued back together.

Partemis 01 removes that step. At 800 × 800 × 1000 mm it prints furniture-scale objects in a single run — no seams, no glue-ups, no hidden joints to fail later.

Large-format 3D printer mid-print, extruding a tall translucent sculptural part
Mid-print: a translucent sculptural part laid down in continuous passes

Why single-piece matters

A glued assembly is only as strong as its weakest joint, and the joint is almost always where it breaks. For signage, props and furniture — things that get carried, mounted, leaned on and knocked — that seam is a liability as much as a cosmetic problem.

Printing the whole object at once means the part has continuous material throughout. Nothing to delaminate, nothing to realign during assembly, and no filler-and-sand cycle before finishing.

Translucent undulating 3D-printed lattice panels 3D-printed RGB-lit infinity sculpture glowing in rainbow colours
Sculptural lattice panels and an illuminated signage piece, both printed large-format

Structural walls, not shells

The machine runs a wide nozzle that lays down a 2.5 mm wall in a single pass. That is wide enough to be structural on its own, so parts don't depend on internal infill to carry load.

The practical effect is fewer passes, less material, shorter print time, and a part that behaves like a solid object rather than a hollow shell with a lattice inside it.

Digital calipers measuring a printed wall at 2.50 mm Close detail of printed infill and frame structure
Measured, not estimated: 2.50 mm off the calipers

What it's for

Trade-show and retail builds, illuminated signage, event and brand activation props, furniture-scale prototypes, and architectural mockups — work that is too large for a desktop machine and too bespoke to justify tooling.

Because there's no mold and no minimum order, a one-off costs what a one-off should. The first part is the deliverable, not a prototype on the way to a production run.

Build volume800 × 800 × 1000 mm
Wall thickness2.5 mm, solid, single pass
Nozzle2.4 mm wide-deposition
Lead timeQuoted per project
Tooling requiredNone — no molds, no minimums
← Capabilities Start a large-format project →
© 2026 Liberti Lab 98 Forrest St, Jersey City, NJ 551-233-6933 hello@liberti-lab.com